|
Windows
CE PPP Setup
Table of
Contents
Introduction
Setting up an Internet Connection
Available Internet Software and Setting up Inbox
Server Information for Use with the Internet Service
Introduction
This guide gives information on how you should configure Windows CE for
Palm Top computers. This setup guide was developed using a Hewlett Packard
320 LX with Microsoft Windows CE Version 1.0 (Build 782-782). It was also
tested using a Cassiopeia A-20 with Microsoft Windows CE Version 2.0 (Build
7258-7260). If you have any questions or concerns on your particular Palm
Top machine contact your manufacturer directly.
Setting
up an Internet Connection
1.Setup your PCMCIA modem (contact your manufacturer if needed).
2.Go to Make New Connection by do the following:
a.Click Start
b.Click Programs
c.Click the Communication Folder
d.Start Remote Networking
e.Start Make New Connection (if you are editing an existing connection
highlight the icon name and click File then Properties).
3.Make a New Connection Setup Wizard Panel 1 of 2:
a.Type Internet Connection in the name for the connection field.
b.Select Dial-Up Connection for the Connection type.
c.Click Next.
4.Make a New Connection Setup Wizard Panel 2 of 2:
a.Verify your Modem is chosen under the Select a Modem and click the button
Configure and verify the following settings:
1) Manual dial and all options under Terminals should be Unchecked.
2) The Connection preferences should be set as follows:
Baud Rate: Your modem Port speed should be here.
Note: For the modem/port speed settings: 19200, 38400 and 57600 are safe
settings for 14400, 28800/33600 and 56K modems respectively.
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: Hardware
3) The Call options tab are all preferences. (If your modem does not recognize
your dial tone then Uncheck Wait for dial tone).
4) Click OK
b.Click the button TCPIP settings and verify the following settings:
1) Server assigned IP address should be checked.
2) If present Log on to network and Use Slip should NOT be checked.
3) Use software compression should NOT be checked.
4) Use IP header compression should be checked.
5) Uncheck Server assigned name server addresses and enter your DNS servers
(this may be under a tab called Name Servers).
Note: The default Internet name servers are 207.20.154.12
and 204.247.247.10 (for
943/923 numbers) or 69.19.189.116 (for
56k numbers).
6) Click OK
c.Enter the local dial access number in the Telephone number field. (The
area and country code settings are preferences).
d.Click Finish
5.Start the Internet Connection icon and verify the following:
a.User Name should be your ASIS user name
b.Password should contain your login password. (Select Save password if
you would like to have your password stored in the software).
c.Domain should be left blank.
d.Click Dial properties to change your phone preferences.
6.To connect to the Internet click Connect on the icon connection panel.
Once completing the connection process you should start your Internet
applications (see the software section for setup information). If you
have any connection problems or your Internet applications fail to function
see the troubleshooting section.
Available
Internet Software and Setting up Inbox
1.The Internet applications that may come pre-loaded on your system will
be Microsoft Pocket Interent Explorer that you should use as your browser
and Inbox that you can use as your email application.
2.Do the following to setup Inbox to send and receive email:
Start the Inbox application.
Click Service on the menu bar.
Verify Internet Mail is selected and click Properties.
Choose Internet Connection in the Connection field.
Type mail.asis.com in the Mail or
POP3 host field.
Type your ASIS username in the User ID field.
Type your password in the password field (if desired click remember password).
Type mail.asis.com in SMTP or Host
for sending messages field.
Type your e-mail address in the Return address field.
Click Next for optional preferences or click Finished.
Server
Information for Use with the Internet Service
User name: All lowercase - you must append @asis
to your username to logon, thus: username@asis
Password: Your password is case sensitive, upper and lower case are different.
Email: your Email address is username@asis.com
Your incoming mail or POP server is mail.asis.com
Your outgoing mail or SMTP server is mail.asis.com
Your DNS servers are:
Primary: 207.20.154.12
Secondary (for 943/923 numbers): 204.247.247.10
Secondary (for 56k numbers): 69.19.189.116
For access numbers throughout California, The United States, and parts
of Canada please view our numbers page here.
|